![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM Client/Server » View Thread |
Messages 1 to 5 of 5 total |
![]() |
Wed, Nov 15 2006 4:47 PM | Permanent Link |
"Brian Kennedy" | Hello. In all of my years using DBISAM, this is the first time I have ever
seen this error. I didn't see anything current on this error in the newsgroups. Client writes: "I'm installing your application across my network, and when I installed it at my remote location I received the following error message: DBISAM Engine Error# 15002 Error uncompressing data. I haven't had this problem when installing on the local network." Any ideas on the problem? Thank you in advance. Brian Kennedy Version 4.22 Build 6. |
Thu, Nov 16 2006 3:42 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Brian,
<< Hello. In all of my years using DBISAM, this is the first time I have ever seen this error. I didn't see anything current on this error in the newsgroups. Client writes: "I'm installing your application across my network, and when I installed it at my remote location I received the following error message: DBISAM Engine Error# 15002 Error uncompressing data. I haven't had this problem when installing on the local network." >> Is the database server and the client application both using the same 4.22 B6 ? If so, then the only thing I can think of that it would be is environmental, such as a firewall or filter that is interfering with the comms. -- Tim Young Elevate Software www.elevatesoft.com |
Fri, Nov 17 2006 4:18 PM | Permanent Link |
Brian Kennedy | < Is the database server and the client application both using the same 4.22
B6 ? If so, then the only thing I can think of that it would be is environmental, such as a firewall or filter that is interfering with the comms. > -- Tim Young Elevate Software www.elevatesoft.com My client writes: "There are no firewalls in place between our two buildings. We have one router at each location, and they are configured to let anything go between our two IP addresses. I have installed Timeclock Plus at the other location, and it works off of the database stored at our main location. That has run without problems. The only other piece of information is that the connection between the two buildings is relatively slow at 384k. Could that cause any problems?" Tim - Is there anything else I can check? Thanks Brian Kennedy |
Fri, Nov 17 2006 4:18 PM | Permanent Link |
Brian Kennedy | < Is the database server and the client application both using the same 4.22
B6 ? If so, then the only thing I can think of that it would be is environmental, such as a firewall or filter that is interfering with the comms. > -- Tim Young Elevate Software www.elevatesoft.com My client writes: "There are no firewalls in place between our two buildings. We have one router at each location, and they are configured to let anything go between our two IP addresses. I have installed Timeclock Plus at the other location, and it works off of the database stored at our main location. That has run without problems. The only other piece of information is that the connection between the two buildings is relatively slow at 384k. Could that cause any problems?" Tim - Is there anything else I can check? Thanks Brian Kennedy |
Mon, Nov 20 2006 4:47 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Brian,
<< Timeclock Plus at the other location, and it works off of the database stored at our main location. That has run without problems. The only other piece of information is that the connection between the two buildings is relatively slow at 384k. Could that cause any problems?" >> Is the connection hard-wired or wireless ? I can't see how TCP/IP would allow incomplete transmissions, but I guess that physical interruptions might be possible in a way that could cause some flaky results. -- Tim Young Elevate Software www.elevatesoft.com |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |