![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM Client/Server » View Thread |
Messages 1 to 9 of 9 total |
![]() |
Fri, Feb 2 2007 11:27 PM | Permanent Link |
"Glynn Owen [RTC]" | How does one set the DBISAM Manager to open Local vs. Remote
connections? Mine insists on trying for a remote connection and I can't find any way to set it to just use local connections. TIA, Glynn |
Sat, Feb 3 2007 12:20 AM | Permanent Link |
"Johnnie Norsworthy" | "Glynn Owen [RTC]" <NOSPAM.glynn.owenATrealthinclient.com> wrote in message
news:A0AFDA7D-CFE1-4F45-900C-52D9B18E99C0@news.elevatesoft.com... > How does one set the DBISAM Manager to open Local vs. Remote > connections? Mine insists on trying for a remote connection and I can't > find any way to set it to just use local connections. Glynn, TDBISAMSession.SessionType := stLocal -Johnnie |
Sat, Feb 3 2007 11:36 AM | Permanent Link |
"Glynn Owen [RTC]" | Johnnie Norsworthy wrote:
> "Glynn Owen [RTC]" <NOSPAM.glynn.owenATrealthinclient.com> wrote in > message > news:A0AFDA7D-CFE1-4F45-900C-52D9B18E99C0@news.elevatesoft.com... > > How does one set the DBISAM Manager to open Local vs. Remote > > connections? Mine insists on trying for a remote connection and I > > can't find any way to set it to just use local connections. > > Glynn, > > TDBISAMSession.SessionType := stLocal > > -Johnnie I'm referring to the utility provided for viewing and editing databases, not a component. Glynn -- http://realthinclient.com |
Sat, Feb 3 2007 12:44 PM | Permanent Link |
Fernando Dias ![]() | Glynn,
Just before you open a table (or query), you can see a radio group near the top of the dialog, where you can chose between "Local" or "Remote". -- Fernando Dias http://easygate.com.pt/components |
Sat, Feb 3 2007 1:35 PM | Permanent Link |
"J. B. Ferguson" | Open the "File" | "Options" menu selection, then select the "Remote"
tab. Set the IP address to the default local host of 127.0.0.1 and make sure the Host Name and Service fields are blank. Also make sure the port is correct. Now it will only open with local sessions. OTOH, if you decide to use both C/S and Local, simply click on "Cancel" when you try to open a table. This will open the utility in a "local" mode. -- Regards, Jan Ferguson Glynn Owen [RTC] wrote: <<How does one set the DBISAM Manager to open Local vs. Remote <<connections? Mine insists on trying for a remote connection and I <<can't find any way to set it to just use local connections. << <<TIA, Glynn >> Glynn |
Sat, Feb 3 2007 5:23 PM | Permanent Link |
"Glynn Owen [RTC]" | J. B. Ferguson wrote:
> Open the "File" | "Options" menu selection, then select the "Remote" > tab. Set the IP address to the default local host of 127.0.0.1 and > make sure the Host Name and Service fields are blank. Also make sure > the port is correct. Now it will only open with local sessions. > > OTOH, if you decide to use both C/S and Local, simply click on > "Cancel" when you try to open a table. This will open the utility in > a "local" mode. Bingo! Thanks. Glynn -- http://realthinclient.com |
Sat, Feb 3 2007 5:27 PM | Permanent Link |
"Glynn Owen [RTC]" | Fernando Dias wrote:
> Glynn, > > Just before you open a table (or query), you can see a radio group > near the top of the dialog, where you can chose between "Local" or > "Remote". The remote connection I usually use was unavailable because of some problems local to its server, and every time I tried to connect, I had to wait out a long pause while the utility tried to establish a connection. Once that pause was over, I could do as you suggest, but I was trying to eliminate that pause. JB came up with the solution, but thanks for the thought. Glynn -- http://realthinclient.com |
Sun, Feb 4 2007 12:48 PM | Permanent Link |
Jason Lee | That only works if you are not running a server locally. If you are
running a server locally as well, then you can use 0.0.0.0 as the IP address to skip a "remote" session and use local (file/sharing) connection. Regards, Jason Lee Glynn Owen [RTC] wrote: > J. B. Ferguson wrote: > >> Open the "File" | "Options" menu selection, then select the "Remote" >> tab. Set the IP address to the default local host of 127.0.0.1 and >> make sure the Host Name and Service fields are blank. Also make sure >> the port is correct. Now it will only open with local sessions. >> >> OTOH, if you decide to use both C/S and Local, simply click on >> "Cancel" when you try to open a table. This will open the utility in >> a "local" mode. > > Bingo! Thanks. > Glynn > |
Mon, Feb 5 2007 9:43 AM | Permanent Link |
"Glynn Owen [RTC]" | Jason Lee wrote:
> That only works if you are not running a server locally. If you are > running a server locally as well, then you can use 0.0.0.0 as the IP > address to skip a "remote" session and use local (file/sharing) > connection. > > Regards, > > Jason Lee > > Glynn Owen [RTC] wrote: > > J. B. Ferguson wrote: > > > > > Open the "File" | "Options" menu selection, then select the > > > "Remote" tab. Set the IP address to the default local host of > > > 127.0.0.1 and make sure the Host Name and Service fields are > > > blank. Also make sure the port is correct. Now it will only open > > > with local sessions. > > > > > > OTOH, if you decide to use both C/S and Local, simply click on > > > "Cancel" when you try to open a table. This will open the utility > > > in a "local" mode. > > > > Bingo! Thanks. > > Glynn > > Even better. Thanks. glynn -- http://realthinclient.com |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |