![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM General » View Thread |
Messages 1 to 10 of 12 total |
![]() |
Mon, May 1 2006 11:50 PM | Permanent Link |
Graham Wood | Make Delphi WAAAY faster. Get this and install it yesterday - free with source!
Cross posted to here and general discussion. It's just tooo good. This works in D5,,6,7,8,2005,2006. Prepare for warp speed. Loading/code completion etc. super fast. Even the dreaded pause in D2006 when going from code to design tabs has been banished. This is without doubt my new bestest friend. Everything in D7/D2006 (so far tested) is boggling faster. Find it here. http://andy.jgknet.de/misc/DelphiSpeedUpV165.zip Source for this is available at http://andy.jgknet.de/misc/ in this folder |
Tue, May 2 2006 12:43 AM | Permanent Link |
"Adam H." | Hi Graham,
Thanks for that. Can you tell me how to implement it against Microsoft Applications as well? They also need speeding up. ![]() Cheers Adam. |
Tue, May 2 2006 2:34 AM | Permanent Link |
Graham Wood | Yeah... more ram, faster CPU, faster Hard Drive
![]() "Adam H." <ahairsub4@rREMOVEMEspamSTOPPER.jvxp.com> wrote: Hi Graham, Thanks for that. Can you tell me how to implement it against Microsoft Applications as well? They also need speeding up. ![]() Cheers Adam. |
Tue, May 2 2006 5:44 PM | Permanent Link |
Steve Forbes ![]() | Hi Graham,
I installed it yesterday after reading your post, and have to say my experience is quite different to yours ![]() with D7 and has slowed down D2006 significantly. -- Best regards Steve "Graham Wood" <gdwfleetware@netscape.net> wrote in message news:E5E65E89-AB47-4712-8912-BFFEDD13A1F8@news.elevatesoft.com... > Make Delphi WAAAY faster. Get this and install it yesterday - free with > source! > > Cross posted to here and general discussion. It's just tooo good. > > This works in D5,,6,7,8,2005,2006. Prepare for warp speed. Loading/code > completion etc. > super fast. Even the dreaded pause in D2006 when going from code to > design tabs has been > banished. This is without doubt my new bestest friend. Everything in > D7/D2006 (so far > tested) is boggling faster. > > Find it here. > > http://andy.jgknet.de/misc/DelphiSpeedUpV165.zip > Source for this is available at http://andy.jgknet.de/misc/ in this folder > |
Tue, May 2 2006 7:04 PM | Permanent Link |
Graham Wood | Steve,
I'm gobsmacked. I could understand if the differences were subtle but, they're huge. There is absolutely no downside at all for me. On my machine (Dothan Cored Centrino 1.8ghz, 1g ram) the difference is the same as going from a 486 to a Pentium. Seriously. It's like my processor just got bumped up by a complete generation. The differences are the same on both IDE's for me as well. I'm using WinXP Pro SP2 updated with all current MS patches. Don't know what else could be causing me to get such benefit and you to see the opposite. Sorry your mileage varied so badly ![]() Cheers, Graham W. "Steve Forbes" <ozmosys@spamfreeoptusnet.com.au> wrote: Hi Graham, I installed it yesterday after reading your post, and have to say my experience is quite different to yours ![]() with D7 and has slowed down D2006 significantly. -- Best regards Steve "Graham Wood" <gdwfleetware@netscape.net> wrote in message news:E5E65E89-AB47-4712-8912-BFFEDD13A1F8@news.elevatesoft.com... > Make Delphi WAAAY faster. Get this and install it yesterday - free with > source! > > Cross posted to here and general discussion. It's just tooo good. > > This works in D5,,6,7,8,2005,2006. Prepare for warp speed. Loading/code > completion etc. > super fast. Even the dreaded pause in D2006 when going from code to > design tabs has been > banished. This is without doubt my new bestest friend. Everything in > D7/D2006 (so far > tested) is boggling faster. > > Find it here. > > http://andy.jgknet.de/misc/DelphiSpeedUpV165.zip > Source for this is available at http://andy.jgknet.de/misc/ in this folder > |
Tue, May 2 2006 10:28 PM | Permanent Link |
Steve Forbes ![]() | Hi Graham,
Thanks for the reply. Based on the rave review DSU is getting everywhere I'm sure the problem is at my end .. I just hope I can sort it out coz the initial load of D2006 is a dog (and BTW, I'm only loading a single personality) > I'm using WinXP Pro SP2 updated with all current MS patches. Likewise. I'll report back here if I am able to resolve the problem. -- Best regards Steve "Graham Wood" <gdwfleetware@netscape.net> wrote in message news:309BA7F2-09E5-40BB-85CC-1CB17727B7C2@news.elevatesoft.com... > Steve, > > I'm gobsmacked. I could understand if the differences were subtle but, > they're huge. > There is absolutely no downside at all for me. > > On my machine (Dothan Cored Centrino 1.8ghz, 1g ram) the difference is the > same as going > from a 486 to a Pentium. Seriously. It's like my processor just got > bumped up by a > complete generation. The differences are the same on both IDE's for me as > well. > > I'm using WinXP Pro SP2 updated with all current MS patches. Don't know > what else could > be causing me to get such benefit and you to see the opposite. > > Sorry your mileage varied so badly ![]() > > Cheers, > Graham W. > > > "Steve Forbes" <ozmosys@spamfreeoptusnet.com.au> wrote: > > Hi Graham, > > I installed it yesterday after reading your post, and have to say my > experience is quite different to yours ![]() > with D7 and has slowed down D2006 significantly. > -- > Best regards > > Steve > > "Graham Wood" <gdwfleetware@netscape.net> wrote in message > news:E5E65E89-AB47-4712-8912-BFFEDD13A1F8@news.elevatesoft.com... >> Make Delphi WAAAY faster. Get this and install it yesterday - free with >> source! >> >> Cross posted to here and general discussion. It's just tooo good. >> >> This works in D5,,6,7,8,2005,2006. Prepare for warp speed. Loading/code >> completion etc. >> super fast. Even the dreaded pause in D2006 when going from code to >> design tabs has been >> banished. This is without doubt my new bestest friend. Everything in >> D7/D2006 (so far >> tested) is boggling faster. >> >> Find it here. >> >> http://andy.jgknet.de/misc/DelphiSpeedUpV165.zip >> Source for this is available at http://andy.jgknet.de/misc/ in this >> folder >> > > |
Wed, May 3 2006 2:58 AM | Permanent Link |
Roy Lambert NLH Associates ![]() | I don't know if you two have noticed but D2006 seems to have such a wide range of experiences (read loads of different problems) for everyone its not surprising that two people get different results.
It may have to do with things like having code insight, together etc loaded or not. As a guess they're getting us ready for Delphi to be bought by M$ - you all know how weird that software is ![]() Roy Lambert |
Wed, May 3 2006 9:49 AM | Permanent Link |
Steve Forbes ![]() | Hi Roy,
I am generally happy with the performance of BDS2006 (with all enhancements switched on), except for the load time, .. but DelphiSpeedUp did exactly the opposite for me (and I just installed and tried V1.69 too) > As a guess they're getting us ready for Delphi to be bought by M$ Hmmm, .. you know how to depress a guy ![]() -- Best regards Steve "Roy Lambert" <roy.lambert@skynet.co.uk> wrote in message news:F51DFFE5-FD51-48D5-8C31-379F54FA4B2E@news.elevatesoft.com... >I don't know if you two have noticed but D2006 seems to have such a wide >range of experiences (read loads of different problems) for everyone its >not surprising that two people get different results. > > > It may have to do with things like having code insight, together etc > loaded or not. > > As a guess they're getting us ready for Delphi to be bought by M$ - you > all know how weird that software is ![]() > > Roy Lambert > |
Fri, May 5 2006 7:45 PM | Permanent Link |
Steve Forbes ![]() | Hi Graham,
Just installed V1.7 on my home machine and BDS2006 loadtime (Win32 personality) went from 58 seconds down to 22 seconds!! Swapping between code and design view is way faster too! Success at last ![]() -- Best regards Steve "Steve Forbes" <ozmosys@spamfreeoptusnet.com.au> wrote in message news:EE2FB768-5512-4A77-8179-16BB3DF51430@news.elevatesoft.com... > Hi Graham, > > Thanks for the reply. Based on the rave review DSU is getting everywhere > I'm sure the problem is at my end .. I just hope I can sort it out coz the > initial load of D2006 is a dog (and BTW, I'm only loading a single > personality) > >> I'm using WinXP Pro SP2 updated with all current MS patches. > > Likewise. > > I'll report back here if I am able to resolve the problem. > -- > Best regards > > Steve |
Sat, May 6 2006 9:36 AM | Permanent Link |
Graham Wood | With v1.7, (if you've got ReportBuilder) right click on a tppReport and click on the
'Report Designer...' popup-menu item. Bang! Don't you hate that ![]() Now, there's no such problems for me with v1.65. Even if they don't improve past v1.65, I'll still be happy. "Steve Forbes" <ozmosys@spamfreeoptusnet.com.au> wrote: Just installed V1.7 on my home machine and BDS2006 loadtime (Win32 personality) went from 58 seconds down to 22 seconds!! Swapping between code and design view is way faster too! Success at last ![]() -- |
Page 1 of 2 | Next Page » | |
Jump to Page: 1 2 |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |