![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM General » View Thread |
Messages 11 to 20 of 20 total |
![]() |
Thu, Jun 28 2007 8:55 AM | Permanent Link |
Chris Holland SEC Solutions Ltd. ![]() | The link works for me
Chris Holland Adam H. wrote: > Hi Walter, > >> http://cc.codegear.com/Author/358 > > Thanks for the link, but I'm getting an "Server application Unavailable" > error. Is anyone else able to access this? > > Thanks > > Adam. > > |
Thu, Jun 28 2007 7:10 PM | Permanent Link |
"Adam H." | Hi,
The link seems to be working for me now to - thanks for that. However, I'm still very confused about the issue. The link provides some source code on how to deal with rounding, but I'm still unsure as to when to apply this, or what is the industry standard in dealing with decimal values. ie: Do I apply this before saving any numeric values to a dataset, or are databases incapable of storing true values, making this pointless - so instead should I be creating a float variable everytime I want to use a numeric value, and when collecting the values from the dataset, should I be putting it through one of these rounding routines? Should I be doing this procedure every single time I want to work with decimal values (ie, adding and subtracting) or is it only needed if I'm dividing or multiplying? How should I then work with dbGrids? (ie, How do we get DBGrids to show 1.295 and not 1.29499~999?) In my instance, I have a BCD set to round to 4 decimal places, but will almost always have only 2 decimal places showing. Therefore, on the TFloadfield, I set the display value to 0.00##. However, on the odd occasion, the value reported is still something like 16.2501 when the value should be 16.25. If the value is *truely* 16.2501 I want the grid to be able to display this, but I would also like to be able to store a true value of 16.25 and difereenciate between the two. In my experience, Grids almost always show the correct value, but it's only on the odd occasion that they show the wrong value? Is this most likely because datasets are capable of storing the correct value, but it's the calculations prior to saving the data to the dataset that is causing the rounding issue? Matters that even confuse me more include the fact that when previously using my own rounding function, one computer would round correctly, and yet another computer would go out to 4 decimal places, with the same value in the same dataset. In the provided link, it says that the rounding procedures are for D2 to D7. Does this mean that D2007 doesn't have these rounding issues (ie, fixed automatically by the compiler), and by upgrading to D2007 it will fix my problem without having to recode everywhere in my application that deals with decimals? From what I've able to guess so far, it appears as though the issue isn't with the actual stored values, but moreso when passing them through variables in the memory, but the more I read on the subject, the more I'm questioning whether this is the case. How do you guys deal with decimals? Do you round variables every time you make a calculation, or round before saving variables to a dataset, or round variables after retrieving the information from a dataset? Thanks for all your help (and patience!) From the provided posts I know I should be understanding this, but I'm simply not 'getting it' at the moment. Cheers Adam. |
Fri, Jun 29 2007 5:13 AM | Permanent Link |
"Malcolm" | Adam
As you will know, many decimal fractions cannot be exactly represented in binary. In my case I just accept that the stored values may not be exact and if there are any computations between such values it gets even more likely that the values are not exact. So for display (the easy part) I simply display to the precision required. For comparisons or selections I allow a little lattitude and do things like: if ((floatingpointvalue < 26.2301) and (floatingpointvalue > 26.2299)) then it is equal to 26.23. Naturally I use a suitable precision for the comparison given the data I expect. Not sure if this helps... Malcolm |
Fri, Jun 29 2007 7:29 AM | Permanent Link |
"Robert" | "Adam H." <ahairsub4@rREMOVEMEspamSTOPPER.jvxp.com> wrote in message news:BAC9A003-74EF-46A3-9D3E-1F3E405A7FEA@news.elevatesoft.com... > > Should I be doing this procedure every single time I want to work with > decimal values (ie, adding and subtracting) or is it only needed if I'm > dividing or multiplying? > You need to do it AFTER multiplying or dividing. The key, as I said before, is doing the rounding using currency. Then you get for sure rid of those pesky small decimals. I'm talking about Delphi currency type, not any database's. Robert |
Fri, Jun 29 2007 7:48 AM | Permanent Link |
"Robert" | "Malcolm" <malcolm@spam.will.bounce> wrote in message news:F5EFA9BA-091B-48C4-9C1A-D7962461B71A@news.elevatesoft.com... > > In my case I just accept that the stored values may not be exact and if > there are any computations between such values it gets even more likely > that the values are not exact. > > So for display (the easy part) I simply display to the precision > required. > That brings its own set of problems. Say you have 10 items with a value of 2.4445. They all get displayed and totalled in a report or a grid, using 2 decimals. Each item will display as 2.45. The total will be 24.445, displayed as 24.45. But anybody can eyeball that report and see that the total "should be" 10 times 2.45, or 24.50. See the problem? > For comparisons or selections I allow a little lattitude and do things > like: > > if ((floatingpointvalue < 26.2301) and (floatingpointvalue > > 26.2299)) then it is equal to 26.23. Naturally I use a suitable > precision for the comparison given the data I expect. > Comparisons are the killer, and why you need to round after every divide or multiply. You put a filter "current_balance <> 0" and an item with a balance of 0.001 gets displayed. So you change your filter to "current balance < 0.01" and then the negatives don't get displayed. And on and on. Robert |
Fri, Jun 29 2007 9:23 AM | Permanent Link |
"Adam H." | Hi Robert,
I think the penny's just dropped! > You need to do it AFTER multiplying or dividing. The key, as I said > before, is doing the rounding using currency. Then you get for sure rid of > those pesky small decimals. I'm talking about Delphi currency type, not > any database's. Whenever I've searched on this topic, (and reading your previous posts), I've seen people say to use Currency or BCD's instead of float's to fix this issue. I was using BCD's, but I was thinking in terms of *data* fields - not variant types. (I wasn't even aware that a "Currency" type existed for variables, and mistook this to mean a currency data field!) You just clarified it by mentioning the "Delphi currency type" and not any databases! I've just had a bit of a play with the currency variable, and see that it's limited to 4 decimal places. Perfect for what I'm after! Thanks all for your help! Best Regards Adam. |
Fri, Jun 29 2007 9:25 AM | Permanent Link |
"Adam H." | Hi Malcolm,
Thanks for your reply. It would appear as though the solution I'm after is to use Currency variables instead of double variables. (Not talking datafields here, but Delphi/Pascal variable types). For what I need, I can't see that I'll be using doubles again for a long time - pretty tempted to just to a bulk search and replace in my application to change any double 'variables' to currency type. I think that would do exactily what I need! Cheers Adam. |
Fri, Jun 29 2007 10:08 AM | Permanent Link |
"Robert" | "Adam H." <ahairsub4@rREMOVEMEspamSTOPPER.jvxp.com> wrote in message news:28DF98B1-F407-482C-97C9-A761DF8EF097@news.elevatesoft.com... > Hi Malcolm, > > Thanks for your reply. It would appear as though the solution I'm after is > to use Currency variables instead of double variables. (Not talking > datafields here, but Delphi/Pascal variable types). > > For what I need, I can't see that I'll be using doubles again for a long > time - pretty tempted to just to a bulk search and replace in my > application to change any double 'variables' to currency type. I think > that would do exactily what I need! > Hold your horses ![]() when you multiply and divide, and otherwise it does not matter, so why change it? Robert |
Fri, Jun 29 2007 7:01 PM | Permanent Link |
"Adam H." | Hi Robert,
>> For what I need, I can't see that I'll be using doubles again for a long >> time - pretty tempted to just to a bulk search and replace in my >> application to change any double 'variables' to currency type. I think >> that would do exactily what I need! >> > > Hold your horses ![]() > when you multiply and divide, and otherwise it does not matter, so why > change it? Ok - now I'm confused again. ![]() Let's say I had the figure 2.5, and I decided to divide by 2. In double's, it's possible that it would store the answer as 1.2499999999~9 But with currency types, being only available to 4 decimal places, wouldn't it store that figure as 1.25? I understand the need to round if the answer would have many decimal places, but for basics as per the above do we still have the same problem with currency types too? If that's not the case - what is the benefit of using Delphi Currency type variables? (I'm also assuming to now, that databases have no problems whatsoever in storing a decimal value like 1.25 in a float field, but it's the variable that's originally passed to it that is what's causing the problem) Thanks & Regards Adam. |
Tue, Jul 3 2007 12:58 PM | Permanent Link |
Chris Erdal | "Adam H." <ahairsub4@rREMOVEMEspamSTOPPER.jvxp.com> wrote in
news:2AF4B5CE-C1F1-494C-A287-A03E8DF48665@news.elevatesoft.com: > Hi Robert, > > I think the penny's just dropped! > >> You need to do it AFTER multiplying or dividing. The key, as I said >> before, is doing the rounding using currency. Then you get for sure >> rid of those pesky small decimals. I'm talking about Delphi currency >> type, not any database's. > > Whenever I've searched on this topic, (and reading your previous > posts), I've seen people say to use Currency or BCD's instead of > float's to fix this issue. I was using BCD's, but I was thinking in > terms of *data* fields - not variant types. (I wasn't even aware that > a "Currency" type existed for variables, and mistook this to mean a > currency data field!) > > You just clarified it by mentioning the "Delphi currency type" and not > any databases! > > I've just had a bit of a play with the currency variable, and see that > it's limited to 4 decimal places. Perfect for what I'm after! > Adam, You should store any Delphi currency values in DBISAM's BCD type, as DBISAM's Currency type is a float. I tripped up on that coming from Paradox where (IIRC) the Currency field was an exact number type same as the Delphi Currency type, and my converted application started losing euro-centimes after years of stability... -- Chris (XP-Pro + Delphi 7 Architect + DBISAM 4.25 build 4 + EDB 1.04 build 3) |
« Previous Page | Page 2 of 2 | |
Jump to Page: 1 2 |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |