Login ProductsSalesSupportDownloadsAbout |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM General » View Thread |
Messages 1 to 6 of 6 total |
Error on initial compile of DBISAM 4.27 |
Fri, Mar 27 2009 7:17 PM | Permanent Link |
"Jerry Clancy" | Because SetRange was not working properly for me after hours of chasing it
with 4.21, I just downloaded and installed 4.27. The installation went OK and I adjusted the Library paths and deleted all DCUs but continue to get this error: "Unit dbisamsq was compiled with a different version of dbisamst.DBISAM_TYPESTR_INT32" I even had the library point to the DBISAM code source and still get it. How to fix this? Jerry |
Fri, Mar 27 2009 7:25 PM | Permanent Link |
"Jerry Clancy" | I should note that this is urgent as I can compile nothing now.
Jerry "Jerry Clancy" <jclancy@billtrak.com> wrote in message news:1285AC99-14A4-4899-BF84-7C16977308E9@news.elevatesoft.com... > Because SetRange was not working properly for me after hours of chasing it > with 4.21, I just downloaded and installed 4.27. The installation went OK > and I adjusted the Library paths and deleted all DCUs but continue to get > this error: > > "Unit dbisamsq was compiled with a different version of > dbisamst.DBISAM_TYPESTR_INT32" > > I even had the library point to the DBISAM code source and still get it. > > How to fix this? > > Jerry > |
Fri, Mar 27 2009 9:10 PM | Permanent Link |
"Jerry Clancy" | While I haven't yet found the abberent DCU, we have solved this issue by
moving the dbisam code library ahead of the IntraWeb one in the Tools library paths. We are productive and now a happy camper again. Jerry "Jerry Clancy" <jclancy@billtrak.com> wrote in message news:1285AC99-14A4-4899-BF84-7C16977308E9@news.elevatesoft.com... > Because SetRange was not working properly for me after hours of chasing it > with 4.21, I just downloaded and installed 4.27. The installation went OK > and I adjusted the Library paths and deleted all DCUs but continue to get > this error: > > "Unit dbisamsq was compiled with a different version of > dbisamst.DBISAM_TYPESTR_INT32" > > I even had the library point to the DBISAM code source and still get it. > > How to fix this? > > Jerry > |
Sat, Mar 28 2009 2:53 PM | Permanent Link |
"Jerry Clancy" | As this problem is solved, I also want to say that SetRange was working
properly even earlier. The problem turned out to be a truncated list because years ago I had set a max row value on a grid and totally forgot about it until I finally had one of those "Eureka" moments. All is working as intended now. Jerry "Jerry Clancy" <jclancy@billtrak.com> wrote in message news:1285AC99-14A4-4899-BF84-7C16977308E9@news.elevatesoft.com... > Because SetRange was not working properly for me after hours of chasing it > with 4.21, I just downloaded and installed 4.27. The installation went OK > and I adjusted the Library paths and deleted all DCUs but continue to get > this error: > > "Unit dbisamsq was compiled with a different version of > dbisamst.DBISAM_TYPESTR_INT32" > > I even had the library point to the DBISAM code source and still get it. > > How to fix this? > > Jerry > |
Mon, Mar 30 2009 4:02 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Jerry,
<< I even had the library point to the DBISAM code source and still get it. How to fix this? >> Did you try a Build instead of a Compile ? Usually, this type of thing is caused by a .pas file not being compiled to match other .dcus that are referencing it. -- Tim Young Elevate Software www.elevatesoft.com |
Mon, Mar 30 2009 7:26 PM | Permanent Link |
"Jerry Clancy" | Yeah, I was smart enough to do that. Also wiped out all DCUs, etc. The
problem was the library path. The path immediately above the one for dbisam had the culprit DCU. Correcting the path hierarchy solved it. Thanks for the thought, nonetheless. Jerry "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> wrote in message news:D6D47C31-C40D-45A5-A764-82A69CACA04C@news.elevatesoft.com... > Jerry, > > << I even had the library point to the DBISAM code source and still get > it. > > How to fix this? >> > > Did you try a Build instead of a Compile ? Usually, this type of thing is > caused by a .pas file not being compiled to match other .dcus that are > referencing it. >> |
This web page was last updated on Wednesday, August 14, 2024 at 03:12 PM | Privacy PolicySite Map © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? E-mail us at info@elevatesoft.com |