![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM ODBC Driver » View Thread |
Messages 1 to 5 of 5 total |
![]() |
Fri, May 26 2006 5:04 AM | Permanent Link |
Nick Hemsley | Now I am getting this error after about 2hours of continuous connections (about 20 per
second) ~ 9000 connections. Less crippling, but still too often. Hopefully I can restart the worker process if this happens, in the short term. However in the long term, this app needs to run non-stop. with little down time (months, year(s)). If you have any info, or can reproduce, it would be appreciated Nick The system has called a custom component and that component has failed and generated an exception. This indicates a problem with the custom component. Notify the developer of this component that a failure has occurred and provide them with the information below. Component Prog ID: 0[ODBC][Env 22512a0] Method Name: IDispenserDriver::CreateResource Process Name: w3wp.exe Exception: C0000005 Address: 0x0447EBFB Call Stack: dbodbc! + 0xfebfb odbc32!SQLRowCount + 0xcd2 odbc32!SQLRowCount + 0xe1d odbc32!SQLConnectA + 0x1006 comsvcs!DispManGetContext + 0xa3d |
Tue, May 30 2006 8:30 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Nick,
<< Now I am getting this error after about 2hours of continuous connections (about 20 per second) ~ 9000 connections. Less crippling, but still too often. Hopefully I can restart the worker process if this happens, in the short term. However in the long term, this app needs to run non-stop. with little down time (months, year(s)). If you have any info, or can reproduce, it would be appreciated >> So, the same operations occur for 2 hours, and then the ODBC driver AVs in an SQLRowCount call ? If that's the case, then it sounds external to me. The SQLRowCount call is very simple, and the only way it would AV is if the internal state of the ODBC driver was messed up due to a connection being re-used across thread boundaries. You aren't using connection pooling or anything like that, correct ? -- Tim Young Elevate Software www.elevatesoft.com |
Tue, Sep 26 2006 4:34 AM | Permanent Link |
Nick Hemsley | Apologies for dropping this thread for so long. I have had other issues to look at. This
is now heading back up the priority list. Any tips on how to ascertain this would be appreciated, however I have followed the following DB article: http://support.microsoft.com/kb/189410/EN-US/ and the CPTIMEOUT keyvalue is not set. leading me to believe that connection pooling is not enabled. Nick. "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> wrote: Nick, << Now I am getting this error after about 2hours of continuous connections (about 20 per second) ~ 9000 connections. Less crippling, but still too often. Hopefully I can restart the worker process if this happens, in the short term. However in the long term, this app needs to run non-stop. with little down time (months, year(s)). If you have any info, or can reproduce, it would be appreciated >> So, the same operations occur for 2 hours, and then the ODBC driver AVs in an SQLRowCount call ? If that's the case, then it sounds external to me. The SQLRowCount call is very simple, and the only way it would AV is if the internal state of the ODBC driver was messed up due to a connection being re-used across thread boundaries. You aren't using connection pooling or anything like that, correct ? -- Tim Young Elevate Software www.elevatesoft.com |
Tue, Sep 26 2006 4:05 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Nick,
<< Any tips on how to ascertain this would be appreciated, however I have followed the following DB article: http://support.microsoft.com/kb/189410/EN-US/ and the CPTIMEOUTkeyvalue is not set. leading me to believe that connection pooling is not enabled. >> Correct. The only thing I can recommend at this time is for you to try and isolate what portion of the code is causing the issue. I don't know what your application looks like or anything, so if you could send me a sample it would help me at least get a feel for what you're trying to do. -- Tim Young Elevate Software www.elevatesoft.com |
Wed, Sep 27 2006 12:40 AM | Permanent Link |
Nick | OK,
I'll write up a simple test case & see if I can get it crashing... ![]() Thanks for you reply. Nick "Tim Young [Elevate Software]" <timyoung@elevatesoft.com> wrote: Nick, << Any tips on how to ascertain this would be appreciated, however I have followed the following DB article: http://support.microsoft.com/kb/189410/EN-US/ and the CPTIMEOUTkeyvalue is not set. leading me to believe that connection pooling is not enabled. >> Correct. The only thing I can recommend at this time is for you to try and isolate what portion of the code is causing the issue. I don't know what your application looks like or anything, so if you could send me a sample it would help me at least get a feel for what you're trying to do. -- Tim Young Elevate Software www.elevatesoft.com |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |