![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » DBISAM Technical Support » Support Forums » DBISAM ODBC Driver » View Thread |
Messages 11 to 18 of 18 total |
![]() |
Tue, Jan 11 2011 3:13 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Lori,
<< Tim, also wondering if I have the most recent version? You said 4.3 of the driver, but mine is 4.26. This came from my client who just ordered it recently. How would they go about getting the more recent? >> DBISAM 4.26 is an older version, yes. In order to download the 4.30 version of the DBISAM ODBC Driver, your client will need to make sure that they have an active support plan. Then they will be able to download 4.30 and any other minor releases that occur during the next year, along with a year of phone/email support. -- Tim Young Elevate Software www.elevatesoft.com |
Tue, Jan 11 2011 3:15 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Lori,
<< Thank you Tim, I'm confirming that version with my client. Can you tell me, after linking the tables to Access 2007, are you able to then close Access and reopen it and have the tables automatically refreshed? This is my problem. I can link the tables just fine the first time, but they fail upon re-opening the database. >> When you say "fail", do you mean that you're seeing an error message, or that they don't refresh ? What I'm doing is this: 1) Creating a new database 2) Creating a new linked table 3) Shutting down Access 4) Restarting Access 5) Opening the same database 6) Opening the linked table -- Tim Young Elevate Software www.elevatesoft.com |
Fri, Jan 14 2011 6:18 PM | Permanent Link |
Lori Jones | Good to know, perhaps that is the problem. I will have my client download the most recent version of the driver and let you know the results. Thank you,
"Tim Young [Elevate Software]" wrote: Lori, << Tim, also wondering if I have the most recent version? You said 4.3 of the driver, but mine is 4.26. This came from my client who just ordered it recently. How would they go about getting the more recent? >> DBISAM 4.26 is an older version, yes. In order to download the 4.30 version of the DBISAM ODBC Driver, your client will need to make sure that they have an active support plan. Then they will be able to download 4.30 and any other minor releases that occur during the next year, along with a year of phone/email support. -- Tim Young Elevate Software www.elevatesoft.com |
Fri, Jan 14 2011 6:20 PM | Permanent Link |
Lori Jones | When I follow the same steps that you show below I receive an ODBC Call failure and the table data will not display in Access. I will have the customer download the most recent version of DBISAM driver and then see what happens. Thanks,
"Tim Young [Elevate Software]" wrote: Lori, << Thank you Tim, I'm confirming that version with my client. Can you tell me, after linking the tables to Access 2007, are you able to then close Access and reopen it and have the tables automatically refreshed? This is my problem. I can link the tables just fine the first time, but they fail upon re-opening the database. >> When you say "fail", do you mean that you're seeing an error message, or that they don't refresh ? What I'm doing is this: 1) Creating a new database 2) Creating a new linked table 3) Shutting down Access 4) Restarting Access 5) Opening the same database 6) Opening the linked table -- Tim Young Elevate Software www.elevatesoft.com |
Sun, Feb 6 2011 3:18 PM | Permanent Link |
Lori Jones | Followup, my client had to get a new server. I now am trying again to link the tables to Access 2007, using DBISAM 4.3, Build 2 ODBC Driver.
I now can pull the tables into Access via Get External Data, but when I try to open them or query on them I receive the following error: ODBC Call Failed. [Elevate Software][DBISAM]DBISAM Engine Error #11010 Table or backup file 'name of table' does not exist (#11010) Please assist. I have linked various tables to Access via SQL and ODBC numerous times, must be missing something here, but I cannot figure out what?? Pleae advise, thanks, Lori Jones wrote: Tim, also wondering if I have the most recent version? You said 4.3 of the driver, but mine is 4.26. This came from my client who just ordered it recently. How would they go about getting the more recent? Thanks, Lori Lori Jones wrote: Thank you Tim, I'm confirming that version with my client. Can you tell me, after linking the tables to Access 2007, are you able to then close Access and reopen it and have the tables automatically refreshed? This is my problem. I can link the tables just fine the first time, but they fail upon re-opening the database. If you do not have this problem, can you please tell me your process for creating the ODBC link? I am versed in setting these up, but seem to be having trouble configuring this one. Thank you, "Tim Young [Elevate Software]" wrote: Lori, << Wondering if anything more has been discussed regarding this older thread on linking tables to Access 2007? I am having the exact same trouble. At times, even a refresh will not work, I have to actually recreate the data source before I can go into Access and see the data. While I can get around this for now, it will not be a workable solution for my client. >> I just tried linking some tables using Access 2007 and the DBISAM 4.30 ODBC Driver, and it works fine. The version of Access 2007 that I'm using is: Microsoft Office Access 2007 (12.0.6535.5005) SP2 MSO (12.0.6545.5004) -- Tim Young Elevate Software www.elevatesoft.com |
Tue, Feb 8 2011 10:28 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Lori,
<< Please assist. I have linked various tables to Access via SQL and ODBC numerous times, must be missing something here, but I cannot figure out what?? >> Are you sure that the tables you're trying to access are DBISAM 4.x tables ? You can check this via the DBISAM 4.x DBSYS utility under Utilities/Table Version. You can download/install DBSYS here: http://www.elevatesoft.com/download?action=info&category=dbisam&type=dbisamadd&majorversion=4&version=4.30 -- Tim Young Elevate Software www.elevatesoft.com |
Mon, Feb 21 2011 3:57 PM | Permanent Link |
Lori Jones | Tim,
I finally have the tables linking without requiring a refresh, however there are some tables I still cannot link to. All tables I am attempting to connect to are in the same folder C:\Alice\Tables. Some I can connect to, others I cannot --- Access says "The Microsoft Office Access Database engine could not find the object 'Clients'. Make sure the object exists and that you spell its name and the path name correctly." Can you explain why some tables I can link to, such as ChildList, but others I cannot? Wouldn't they all be DBISAM 4.x tables? Please advise, the customer is getting anxious for results, and I have hit many dead ends. Thank you, Lori Jones "Tim Young [Elevate Software]" wrote: Lori, << Please assist. I have linked various tables to Access via SQL and ODBC numerous times, must be missing something here, but I cannot figure out what?? >> Are you sure that the tables you're trying to access are DBISAM 4.x tables ? You can check this via the DBISAM 4.x DBSYS utility under Utilities/Table Version. You can download/install DBSYS here: http://www.elevatesoft.com/download?action=info&category=dbisam&type=dbisamadd&majorversion=4&version=4.30 -- Tim Young Elevate Software www.elevatesoft.com |
Tue, Feb 22 2011 9:18 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Lori,
<< I finally have the tables linking without requiring a refresh, however there are some tables I still cannot link to. All tables I am attempting to connect to are in the same folder C:\Alice\Tables. Some I can connect to, others I cannot --- Access says "The Microsoft Office Access Database engine could not find the object 'Clients'. Make sure the object exists and that you spell its name and the path name correctly." Can you explain why some tables I can link to, such as ChildList, but others I cannot? Wouldn't they all be DBISAM 4.x tables? >> I couldn't tell you without seeing the actual tables. If you want to email them to me, I can tell you what the problem is. I'll need the .dat, .idx, and .blb (if present). -- Tim Young Elevate Software www.elevatesoft.com |
« Previous Page | Page 2 of 2 | |
Jump to Page: 1 2 |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |