![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » ElevateDB Technical Support » Support Forums » ElevateDB SQL » View Thread |
Messages 1 to 10 of 15 total |
![]() |
Thu, Jul 16 2009 8:22 PM | Permanent Link |
Steve Gill | I’m about to show my total ignorance on how to write Stored Procedures using Dynamic SQL so please keep the chuckling and guffaws to a minimum. ![]() I’m trying to write a stored procedure to add a user to the system Users table and my database Users table, as well as assign them to a role. I know how to do this using Static SQL (well at least in MS SQL anyway) but haven’t a clue how to do it with Dynamic SQL in ElevateDB. Here’s my uninspiring attempt: PROCEDURE "AddUser" (IN "PUsername" VARCHAR(30) COLLATE ANSI, IN "PPassword" VARCHAR(20) COLLATE ANSI, IN "PAdmin" BOOLEAN, IN "PExpires" BOOLEAN, IN "PExpiryDate" DATE, IN "PEnabled" BOOLEAN) BEGIN DECLARE Result CURSOR FOR SQLStatement; -- Add user to system Users table PREPARE SQLStatement FROM 'CREATE USER PUsername PASSWORD PPassword'; EXECUTE SQLStatement; -- Add user to database Users table PREPARE SQLStatement FROM 'INSERT INTO MyDatabase.Users (Username, Admin, Expires, ExpiryDate, Enabled) VALUES (PUsername, PAdmin, PExpires, PExpiryDate, True)'; EXECUTE SQLStatement; -- Add user to the appropriate role PREPARE SQLStatement FROM 'IF PAdmin = True THEN GRANT Administrators TO PUsername END'; EXECUTE SQLStatement; END As you can probably see I have no idea what I'm doing. My problem is that ElevateDB doesn't seem to like my parameters. Please tell me what I'm doing wrong. Be gentle. ![]() Thanks. Regards, SteveG |
Fri, Jul 17 2009 3:28 AM | Permanent Link |
Uli Becker | Steve,
> As you can probably see I have no idea what I'm doing. My problem is that ElevateDB doesn't seem to like my parameters. Please tell me what I'm doing > wrong. Be gentle. ![]() This should work: PROCEDURE "Test" (IN "PUsername" VARCHAR(30) COLLATE ANSI, IN "PPassword" VARCHAR(20) COLLATE ANSI, IN "PAdmin" BOOLEAN, IN "PExpires" BOOLEAN, IN "PExpiryDate" DATE, IN "PEnabled" BOOLEAN) BEGIN DECLARE Result CURSOR FOR SQLStatement; -- Add user to system Users table PREPARE SQLStatement FROM 'CREATE USER "' + PUsername + '" Password ''' + PPassword + ''''; EXECUTE SQLStatement; -- Add user to the appropriate role if PAdmin = True then PREPARE SQLStatement FROM 'GRANT "Administrators" TO ' + PUsername; EXECUTE SQLStatement; End If; -- Add user to database Users table PREPARE SQLStatement FROM 'INSERT INTO MyUsers (Username, Admin, Expires, ExpiryDate, Enabled) VALUES (?, ?, ?, ?, True)'; EXECUTE SQLStatement using PUsername, PAdmin, PExpires, PExpiryDate; END 1. Generally you can pass the parameters by using the wildcard "?" and adding the parameters with "using". 2. Sometimes dynamic parameters are not allowed - this seems to be the case with "Create User" and "Grant...". (At least they didn't work when I tried them.) In this case you can compose the statement. Don't miss the correct number of quotes. 3. You shouldn't have a table named "User" in your database. That's why I renamed it to "MyUser". Regards Uli |
Fri, Jul 17 2009 12:19 PM | Permanent Link |
"David Cornelius" | > As you can probably see I have no idea what I'm doing. My problem is
> that ElevateDB doesn't seem to like my parameters. Please tell me > what I'm doing wrong. Be gentle. ![]() What I do when I'm not sure about syntax or methodology, is do it manually in EDB Manager, then look at the SQL History--it's a wonderful help! -- David Cornelius Cornelius Concepts |
Fri, Jul 17 2009 2:21 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Steve,
In addition to Uli's excellent response, I would just add that EXECUTE IMMEDIATE is the easiest route when executing DDL statements, which can't use parameters, thus making the whole DECLARE/PREPARE/EXECUTE cycle nothing more than excess statements. PROCEDURE "AddUser" (IN "PUsername" VARCHAR(30) COLLATE ANSI, IN "PPassword" VARCHAR(20) COLLATE ANSI, IN "PAdmin" BOOLEAN, IN "PExpires" BOOLEAN, IN "PExpiryDate" DATE, IN "PEnabled" BOOLEAN) BEGIN -- Add user to system Users table EXECUTE IMMEDIATE 'CREATE USER ' + QUOTEDSTR(PUsername, '"') + ' PASSWORD ' + QUOTEDSTR(PPassword, '"'); -- Add user to the appropriate role IF PAdmin = True THEN EXECUTE IMMEDIATE 'GRANT Administrators TO ' + QUOTEDSTR(PUsername, '"'); END; END BTW, hush-hush on QUOTEDSTR(), it's not supposed to be in there until 2.03. ![]() -- Tim Young Elevate Software www.elevatesoft.com |
Fri, Jul 17 2009 6:34 PM | Permanent Link |
Steve Gill | Thanks Tim, Uli and David for your help. Much appreciated.
And thanks for the QuotedStr tip Tim! I won't tell anyone. ![]() Steve |
Sat, Jul 18 2009 4:21 AM | Permanent Link |
Uli Becker | Tim,
> BTW, hush-hush on QUOTEDSTR(), it's not supposed to be in there until 2.03. I love this. ![]() Uli |
Tue, Jul 28 2009 6:22 PM | Permanent Link |
Steve Gill | I wanted to say thanks again Tim, Uli and David for your help. After not having a clue on how to write a single stored procedure in ElevateDB, I've now written over
40 for my new application. And amazingly they all work. Wonders will never cease. ![]() Regards, Steve |
Wed, Jul 29 2009 12:12 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Steve,
<< I wanted to say thanks again Tim, Uli and David for your help. After not having a clue on how to write a single stored procedure in ElevateDB, I've now written over 40 for my new application. And amazingly they all work. >> Cool, I'm glad that you're making progress. ![]() know, you can prototype a stored procedure as a script in EDB in the EDB Manager. There's a built-in script debugger in the EDB Manager that you can use to set breakpoints, examine local variables, etc. It's very helpful with complicated scripts/procedures/functions/jobs/triggers. -- Tim Young Elevate Software www.elevatesoft.com |
Wed, Jul 29 2009 6:34 PM | Permanent Link |
Steve Gill | "Tim Young [Elevate Software]" wrote:
> Cool, I'm glad that you're making progress. ![]() > know, you can prototype a stored procedure as a script in EDB in the EDB > Manager. There's a built-in script debugger in the EDB Manager that you can > use to set breakpoints, examine local variables, etc. It's very helpful > with complicated scripts/procedures/functions/jobs/triggers. Thanks Tim, I didn't know that. That's sounds very useful - I'll check it out. EDB Manager is an excellent application. I use it constantly and find it invaluable. Which reminds me, one suggestion I have for EDB Manager is that it would be great if I could select some lines out of a block of SQL code and execute just the selected code. Regards, Steve |
Thu, Jul 30 2009 1:16 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Steve,
<< Which reminds me, one suggestion I have for EDB Manager is that it would be great if I could select some lines out of a block of SQL code and execute just the selected code. >> Do you mean in a script ? EDB scripts are a little more difficult to handle like this because they rely on executing from the begin to the end, and aren't just a series of SQL statements. -- Tim Young Elevate Software www.elevatesoft.com |
Page 1 of 2 | Next Page » | |
Jump to Page: 1 2 |
This web page was last updated on Wednesday, August 14, 2024 at 03:12 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |