![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » ElevateDB Technical Support » Support Forums » ElevateDB SQL » View Thread |
Messages 1 to 8 of 8 total |
![]() |
Sat, Sep 19 2009 8:13 AM | Permanent Link |
Peter | Hello
I have a Date field that records a booking date, and I need to display the number of whole months that have elapsed since that date. In Delphi I use a complicated MonthsBetweenDates method that I can't reproduce in SQL. Is there a way to do that with intervals? The calculation is StartDate - current_date, expressed as an integer. Thanks for your help. Regards & TIA Peter |
Sat, Sep 19 2009 9:50 AM | Permanent Link |
Uli Becker | Peter,
> Is there a way to do that with intervals? The calculation is StartDate - current_date, expressed as an integer. select (Current_Date - StartDate) month from MyTable should do the trick. Please not the missing "interval" in calculations like this and the parenthesis. In the manual look here: http://www.elevatesoft.com/manual?action=mantopic&id=edb2sql&category=1&topic=25 Regards Uli |
Sat, Sep 19 2009 10:08 AM | Permanent Link |
Uli Becker | Correction:
Please *note* the missing "interval" in calculations like this and the parenthesis. In the manual look here: |
Sun, Sep 20 2009 3:02 AM | Permanent Link |
Peter | Thanks Uli
That helps a lot -though I am still confused about intervals. I'll pick it up eventually. I have another age calculation that I would like to do on the server side, rather than in a calculated persistant field. The system I currently use shows the person's age in years and months, so I take the modulus of the year and 365... iD := trunc(Now) - trunc(tblPer.FieldByName('DOB').AsDateTime); iY := iD div 365; iM := (iD mod 365) div 30; tblPer.FieldByName('AgeSCalc').AsString := Format('%d year(s) %d month(s)', [iY, iM]); ...which is close enough. I have lost some hair trying to work out this one, even after I found the "Calculating AGE" thread. Is there a way to select this in EDB SQL? Regards & TIA Peter |
Sun, Sep 20 2009 3:52 AM | Permanent Link |
Uli Becker | Peter,
> That helps a lot -though I am still confused about intervals. You are not alone. ![]() > Is there a way to select this in EDB SQL? How about this: select DOB, ((Current_Date - DOB month) / 12 as Years, ((Current_Date - DOB) month) mod 12 as Months from MyTable or casted as VarChar: select cast(((Current_Date - DOB ) month) / 12 as VarChar(2)) + ' year(s) ' + cast(((Current_Date - DOB ) month) mod 12 as Varchar(2)) + ' month(s)' as Age from MyTable Regards Uli |
Mon, Sep 21 2009 2:05 AM | Permanent Link |
Peter | Uli
Eeeeexcellent. Laid out like that it appears simple & straitforward. Thanks for your help. Peter |
Mon, Sep 21 2009 2:34 AM | Permanent Link |
Uli Becker | Peter,
> Eeeeexcellent. Laid out like that it appears simple & straitforward. Glad to help. Uli |
Tue, Sep 22 2009 12:22 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Peter,
<< Is there a way to select this in EDB SQL? >> If you don't mind a specific type of formatting, you can do this very easily with a year-month interval: select DOB, CAST((Current_Date - DOB) YEAR TO MONTH AS VARCHAR(20)) AS YearsMonths from MyTable The result will be something like '2-10'. Also, remember that intervals show up as integers in Delphi: Year-Month Intervals are 32-bit integers (TIntegerField) Day-Time Intervals are 64-bit integers (TLargeIntField) There will be code in the new EDB Manager that shows you how to use the TField OnGetText/OnSetText events along with some EDB functions for showing intervals in their proper textual form in Delphi. Here it is for now: Field setup: procedure TMainForm.SetupFields(DataSet: TEDBDataSet); var I: Integer; begin with DataSet do begin for I:=0 to FieldCount-1 do begin with Fields[I] do begin case DataType of {$IFDEF EDB_UNICODE} ftWideString: {$ELSE} ftString: {$ENDIF} begin OnGetText:=GetFieldText; DisplayWidth:=Min(CharDisplayWidth,DisplayWidth); end; ftBytes,ftVarBytes: begin OnGetText:=GetBinaryText; OnSetText:=SetBinaryText; end; {$IFDEF EDB_UNICODE} ftWideMemo: {$ELSE} ftMemo: {$ENDIF} begin OnGetText:=GetBlobText; OnSetText:=SetBlobText; DisplayWidth:=CLOBDisplayWidth; end; ftBlob: begin OnGetText:=GetBlobText; DisplayWidth:=BLOBDisplayWidth; end; ftDate,ftTime,ftDateTime: begin OnGetText:=GetDateTimeText; OnSetText:=SetDateTimeText; end; ftBCD: begin OnGetText:=GetNumericText; OnSetText:=SetNumericText; DisplayWidth:=20; end; ftFloat: begin OnGetText:=GetNumericText; OnSetText:=SetNumericText; DisplayWidth:=16; end; ftInteger: begin if (GetYearMonthIntervalTypeForField(FieldName) <> ymUnknown) then begin OnGetText:=GetYearMonthIntervalText; OnSetText:=SetYearMonthIntervalText; end else OnGetText:=GetFieldText; end; ftLargeInt: begin if (GetDayTimeIntervalTypeForField(FieldName) <> dtUnknown) then begin OnGetText:=GetDayTimeIntervalText; OnSetText:=SetDayTimeIntervalText; end else OnGetText:=GetFieldText; end else OnGetText:=GetFieldText; end; DisplayWidth:=Max((Length(FieldName)+2),DisplayWidth); if FieldIsIndexed(DataSet,FieldName) then DisplayWidth:=(DisplayWidth+4); end; end; end; end; And here's the OnGetText/OnSetText code: procedure TMainForm.GetYearMonthIntervalText(Sender: TField; var Text: String; DisplayText: Boolean); begin if DisplayText and Sender.IsNull then Text:='NULL' else begin if Sender.IsNull then Text:='' else Text:=Engine.YearMonthIntervalToSQLStr(Sender.AsInteger, TEDBDataSet(Sender.DataSet).GetYearMonthIntervalTypeForField(Sender.FieldName)); end; end; procedure TMainForm.SetYearMonthIntervalText(Sender: TField; const Text: String); begin if (Text <> '') then Sender.AsInteger:=Engine.SQLStrToYearMonthInterval(Text, TEDBDataSet(Sender.DataSet).GetYearMonthIntervalTypeForField(Sender.FieldName)) else Sender.Clear; end; procedure TMainForm.GetDayTimeIntervalText(Sender: TField; var Text: String; DisplayText: Boolean); begin if DisplayText and Sender.IsNull then Text:='NULL' else begin if Sender.IsNull then Text:='' else Text:=Engine.DayTimeIntervalToSQLStr(TLargeIntField(Sender).AsLargeInt, TEDBDataSet(Sender.DataSet).GetDayTimeIntervalTypeForField(Sender.FieldName)); end; end; procedure TMainForm.SetDayTimeIntervalText(Sender: TField; const Text: String); begin if (Text <> '') then TLargeIntField(Sender).AsLargeInt:=Engine.SQLStrToDayTimeInterval(Text, TEDBDataSet(Sender.DataSet).GetDayTimeIntervalTypeForField(Sender.FieldName)) else Sender.Clear; end; -- Tim Young Elevate Software www.elevatesoft.com |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |