![]() | ![]() Products ![]() ![]() ![]() ![]() |
Home » Technical Support » Elevate Web Builder Technical Support » Support Forums » Elevate Web Builder General » View Thread |
Messages 11 to 18 of 18 total |
![]() |
Thu, May 6 2021 2:19 AM | Permanent Link |
Paul Coshott | >> Richard Harding wrote:
>> I use NirSoft's Current Ports utility to check what ports are opened. Hi Richard, Thanks for the idea. The port 446 was open by a process called "system". So I changed the port to 540 (which according to Current Ports, wasn't open). I added the rule to the firewall and retried, but got the same problem. Cheers, Paul |
Thu, May 6 2021 2:22 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Paul,
<< Service failed on start: The web server cannot be started (Socket error: An attempt was made to access a socket in a way forbidden by its access permissions. (10013), on API 'bind') >> This typically means that something else is listening on either the normal port or secure port, or both, and preventing the EWB Web Server from binding to that same address/port combination. You can use this command to find out which process is listening on one or more of the ports: netstat -a -b > ports.txt Run it in an Administrator command window. It will run for a while, but then you can hit Ctrl-C to terminate it. Afterwards, you'll see something like this: Active Connections Proto Local Address Foreign Address State TCP 0.0.0.0:80 TIM-DESKTOP:0 LISTENING [ewbide.exe] TCP 0.0.0.0:135 TIM-DESKTOP:0 LISTENING RpcSs [svchost.exe] TCP 0.0.0.0:443 TIM-DESKTOP:0 LISTENING [ewbide.exe] TCP 0.0.0.0:445 TIM-DESKTOP:0 LISTENING Can not obtain ownership information TCP 0.0.0.0:2179 TIM-DESKTOP:0 LISTENING [vmms.exe] TCP 0.0.0.0:3306 TIM-DESKTOP:0 LISTENING [mysqld.exe] TCP 0.0.0.0:3389 TIM-DESKTOP:0 LISTENING TermService Find the processes that are listening on the same ports as the EWB Web Server and that will tell you which processes are interfering with the ability of the EWB Web Server to bind to the same ports. Tim Young Elevate Software www.elevatesoft.com |
Thu, May 6 2021 7:47 PM | Permanent Link |
Paul Coshott | >> Tim Young [Elevate Software] wrote:
>> Find the processes that are listening on the same ports as the EWB Web Server and that will tell you which >> processes are interfering with the ability of the EWB Web Server to bind to the same ports. Hi Tim, Ports are set to: Unsecured : 88 Secured : 560 I ran the command you suggested and let it finish. I searched the file and neither port was in use. But I still have the same problem. Cheers, Paul |
Sat, May 8 2021 5:51 PM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. ![]() | Paul,
<< Ports are set to: Unsecured : 88 Secured : 560 I ran the command you suggested and let it finish. I searched the file and neither port was in use. But I still have the same problem. >> I'm not sure what else to tell you - something in your network stack on your machine is preventing the EWB Web Server from binding to the ports. You could try using TCPView instead and see if that helps you find the problem: https://docs.microsoft.com/en-us/sysinternals/downloads/tcpview Tim Young Elevate Software www.elevatesoft.com |
Tue, May 11 2021 12:03 AM | Permanent Link |
Paul Coshott | Hi Tim,
Walter has been helping me with a few settings, and with his service starting ok, I decided to go right back to the default ini file and try starting the service with nothing but the server name, server description, domain, ip address, port and secure port set. The service started. So I added 1 thing at a time, trying to start the service after each modification to the ini file. I got everything entered with the service still starting, until I got to the certificate entries. Could you please look at the attached screen shot and fill in the exact values I should be using for the following: Certificate Name= Certificate Store Name= Certificate Store Type=1 Thanks, Paul Attachments: mmc certificates.jpg |
Wed, May 12 2021 6:56 AM | Permanent Link |
Raul ![]() | On 5/11/2021 12:03 AM, Paul Coshott wrote:
> Could you please look at the attached screen shot and fill in the exact values I should be using for the following: > > Certificate Name= > Certificate Store Name= > Certificate Store Type=1 > Certificate Name=rostermeon.pcapps.one Certificate Store Name= Certificate Store Type=1 Raul |
Wed, May 12 2021 7:13 AM | Permanent Link |
Raul ![]() | On 5/12/2021 6:56 AM, Raul wrote:
> > Certificate Name=rostermeon.pcapps.one > Certificate Store Name= > Certificate Store Type=1 > I have basically same setup and it works OK here. I have a Lets Enrypt wildcard cert in computer certs EWB 3 Web Server is configured to use that and starts OK URL comes up OK and shows the file from EWB3 content folder Raul Attachments: 2021-05-12_7-09-51.jpg |
Thu, May 13 2021 5:39 AM | Permanent Link |
Paul Coshott | > Raul wrote:
> > Certificate Name=rostermeon.pcapps.one > Certificate Store Name= > Certificate Store Type=1 > Huge thanks to Richard, Walter and Raul. With this last bit from Raul, (the certificate values) correct and in place, the server service is now started. I tested the app and all running great. Browser reports the app as being secure. Sometimes learning stuff can be frustrating, but with great support and the amazing people on this forum, everything is possible, eventually ![]() Thanks everyone for any past help. Cheers, Paul |
« Previous Page | Page 2 of 2 | |
Jump to Page: 1 2 |
This web page was last updated on Wednesday, August 14, 2024 at 07:31 PM | Privacy Policy![]() © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? ![]() |