Login ProductsSalesSupportDownloadsAbout |
Home » Technical Support » Elevate Web Builder Technical Support » Support Forums » Elevate Web Builder General » View Thread |
Messages 1 to 10 of 12 total |
Bug? - Strange behavior in TRadioButton |
Wed, Dec 11 2013 11:33 AM | Permanent Link |
aberas | I have a form with 3 groups of radiobuttons (GroupIndexes 0, 1 and 2).
If I try to set one default checked radiobutton in the GroupIndex 0, it won't stick. If I close and reopen the project, or if I compile it and test it, gone is the checked setting. I've even checked on the .wbf and everything it's ok there (it shows as checked), but in the IDE or the compiled program, not ckecked at all. If I rename the GroupIndexes as 1, 2 and 3, everything works as it should. I didn't report it as an Incident Report because it's seems to be and IDE problem and didn't want to submit an incorrect reporte. Sorry if it is the wrong place. |
Sat, Dec 14 2013 7:02 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | << I have a form with 3 groups of radiobuttons (GroupIndexes 0, 1 and 2). If I try to set one default checked radiobutton in the GroupIndex 0, it won't stick. If I close and reopen the project, or if I compile it and test it, gone is the checked setting. I've even checked on the .wbf and everything it's ok there (it shows as checked), but in the IDE or the compiled program, not ckecked at all. If I rename the GroupIndexes as 1, 2 and 3, everything works as it should. >> Please send me an example project that illustrates the problem and I'll take a look (timyoung@elevatesoft.com). Thanks, Tim Young Elevate Software www.elevatesoft.com |
Sat, Dec 14 2013 8:54 AM | Permanent Link |
aberas | Tim:
I've tried to send you the mail, but it bounced back with this error: --------------------------------------------------------------------------- Delivery to the following recipient failed permanently: timyoung@elevatesoft.com Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain elevatesoft.com by mail.elevatesoft.com. [64.65.248.118]. The error that the other server returned was: 554 Transaction failed - from address does not correlate to sending mail host --------------------------------------------------------------------------- Please advice. "Tim Young [Elevate Software]" wrote: << I have a form with 3 groups of radiobuttons (GroupIndexes 0, 1 and 2). If I try to set one default checked radiobutton in the GroupIndex 0, it won't stick. If I close and reopen the project, or if I compile it and test it, gone is the checked setting. I've even checked on the .wbf and everything it's ok there (it shows as checked), but in the IDE or the compiled program, not ckecked at all. If I rename the GroupIndexes as 1, 2 and 3, everything works as it should. >> Please send me an example project that illustrates the problem and I'll take a look (timyoung@elevatesoft.com). Thanks, Tim Young Elevate Software www.elevatesoft.com |
Sat, Dec 14 2013 3:46 PM | Permanent Link |
Walter Matte Tactical Business Corporation | send it to support@elevatesoft.com ... he will get it!
Walter |
Sun, Dec 15 2013 8:27 AM | Permanent Link |
aberas | Thanks Walter, but I got the same result:
Delivery to the following recipient failed permanently: support@elevatesoft.com Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain elevatesoft.com by mail.elevatesoft.com. [64.65.248.118]. The error that the other server returned was: 554 Transaction failed - from address does not correlate to sending mail host ----- Original message -----... |
Sun, Dec 15 2013 8:59 AM | Permanent Link |
Roy Lambert NLH Associates Team Elevate | aberas
The problem is as it says. Part of Tim's anti-spam checking is wether your email address and host domain match. In your case the answer is obviously no. The solution is for Tim to add your email address to the whitelist. I've sent him an email to let him know it needs doing. Roy Lambert [Team Elevate] |
Sun, Dec 15 2013 9:18 AM | Permanent Link |
aberas | Roy / Walter /Tim
It seems it was my fault. I wasn't using the account registered in the forums. I've resent the mail from that account and it seems it went through. aberas The problem is as it says. Part of Tim's anti-spam checking is wether your email address and host domain match. In your case the answer is obviously no. The solution is for Tim to add your email address to the whitelist. I've sent him an email to let him know it needs doing. Roy Lambert [Team Elevate] |
Mon, Dec 16 2013 7:35 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Aberas,
<< I've tried to send you the mail, but it bounced back with this error: >> Our mail server uses the sender's email address (as identified by the sending mail server) to check that the sending mail server is actually the valid mail server for the domain of the sending email address. 99% of spam either uses an invalid/blank host name or an IP address, as opposed to a legitimate mail server with an actual host name and proper MX records for the mail hosts. However, if you're using a 3rd party mail server to send your mail for your company domain, then this check can also trip it up since the sending mail server host name won't correspond to the domain name of the sending email address. For example, if you're sending mail through Google mail as myname@mycompany.com, then our mail server will block such a transaction unless you're on our whitelist. All customers/registered users and anyone that we send email to is automatically added to the whitelist. Tim Young Elevate Software www.elevatesoft.com |
Mon, Dec 16 2013 7:35 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Aberas,
<< It seems it was my fault. I wasn't using the account registered in the forums. I've resent the mail from that account and it seems it went through. >> I've got it now, thanks. Tim Young Elevate Software www.elevatesoft.com |
Mon, Dec 16 2013 9:28 AM | Permanent Link |
Tim Young [Elevate Software] Elevate Software, Inc. timyoung@elevatesoft.com | Aberas,
Okay, the issue is with the saving of the properties for group indexes of 0. The properties aren't saved because they're the "default", and so that messes up the loading. For now, the workaround is to use group indexes of 1, 2, and 3 for your 3 groups, and that will fix the problem. Tim Young Elevate Software www.elevatesoft.com |
Page 1 of 2 | Next Page » | |
Jump to Page: 1 2 |
This web page was last updated on Tuesday, September 17, 2024 at 04:19 AM | Privacy PolicySite Map © 2024 Elevate Software, Inc. All Rights Reserved Questions or comments ? E-mail us at info@elevatesoft.com |